Product features
Thermoplastic enclosure
Double insulated X
Suitable for in-line mounting
With pre-wired cable
Actuator: Offset roller lever with collar WHK
Actuating speed max. 0.5 m/s with a vertical actuating angle of 40°
Actuation only possible from right-hand side
Free movement of actuator from left-hand side
Metal roller
Watertight collar for protection against penetration of dirt
Notes
Actuator can be repositioned by 180° on request
With plastic roller available on request
Technical data
General technical data
Applied standards
EN 60947-5-1
Enclosure
thermoplastic, glass-fibre reinforced, shockproof, self-extinguishing UL 94 V-0
Tightening torque
enclosure mounting screws: max. 5 Nm
Degree of protection
IP67 (IEC/EN 60529)
Contact material
silver
Switching system
slow action
Switching elements
1 NC/1 NO contact, type Zb
Connection
pre-wired cable H05VV-F
Cable cross-section
4 x 0.75 mm²
Cable length
2 m
Rated impulse withstand voltage Uimp
4 kV
Rated insulation voltage Ui
250 V
Conventional thermal current Ithe
6 A
Rated operating current/voltage Ie/Ue
6 A/250 VAC; 0.25 A/230 VDC; 4 A/24 VDC
Utilisation category
AC-15; DC-13
Short-circuit protection
6 A gG/gN fuse
Ambient temperature
–20 °C … +75 °C
Mechanical life
> 1 million operations
Operation cycles
max. 1800/h
Repeat accuracy of switching points
± 0.1 mm
Contact opening
max. 2 x 4.5 mm
Approvals
a
Weight
221 g
Downloads
Variants / Options
The following variants / options are available on request:
Cable entry on side
Gold-plated contacts
Plug-in connector M12 x 1, 4-pole
Plug-in connector M12 x 1, 5-pole
Other interesting products
