Product features
Thermoplastic enclosure
Suitable for in-line mounting
With pre-wired cable
Actuator: Offset roller lever with collar WHK
Actuation only possible from right-hand side, free movement of actuator from left-hand side
Metal roller
Watertight collar for protection against penetration of dirt
Technical data
General technical data
- Applied standards
- EN 60947-5-1
- Enclosure
- thermoplastic, glass-fibre reinforced, impact resistant, self-extinguishing UL 94 V-0
- Tightening torque
- enclosure mounting screws: max. 5 Nm
- Degree of protection
- IP67 (IEC/EN 60529)
- Contact material
- silver
- Switching system
- slow action
- Switching elements
- 1 NC/1 NO contact, type Zb
- Connection
- cable H05VV-F
- Cable cross-section
- 4 x 0.75 mm²
- Cable length
- 2 m
- Rated impulse withstand voltage Uimp
- 4 kV
- Rated insulation voltage Ui
- 250 V
- Conventional thermal current Ithe
- 6 A
- Rated operating current/voltage Ie/Ue
- 6 A/250 VAC; 0.25 A/230 VDC; 4 A/24 VDC
- Utilisation category
- AC-15; DC-13
- Short-circuit protection
- 6 A gG/gN fuse
- Safety class
- II
- Ambient temperature
- –20 °C … +75 °C
- Mechanical life
- > 1 million operations
- Actuating speed
- max. 0.5 m/s with a vertical actuating angle of 40°
- Operation cycles
- max. 1800/h
- Repeat accuracy of switching points
- ± 0.1 mm
- Contact opening
- max. 2 x 4.5 mm
- Approvals
- a
- Weight
- 221 g
Dimensional drawing
Further drawings
Contact diagram
Switching diagram
Downloads
Variants / Options
The following variants / options are available on request:
Actuator turned by 180°
Plastic roller
Cable entry on side
Gold-plated contacts
Connector M12 x 1, 4-pole
Connector M12 x 1, 5-pole
