Product features
Ex zone 1 and 21
Metal enclosure, hard-coated
Snap action, change-over contact with single break
Suitable for in-line mounting
With pre-wired cable
Actuator: Spring rod with plastic tip TK
Wear-resistant plastic tip
Spring rod can be actuated from any direction
Elasticity of the spring allows for deflection above the max. switching angle of 18°
Attention: Please state required international approvals with your order!
Technical data
General technical data
Applied standards
EN IEC 60079-0, EN 60079-1, EN 60079-31, EN 60947-5-1
Enclosure
aluminium die-cast, hard-coated
Degree of protection
IP65 (IEC/EN 60529)
Contact material
silver
Switching system
snap action
Switching elements
1 change-over contact with single break, type C
Connection
pre-wired cable H05VV-F
Cable cross-section
4 x 0.75 mm² (incl. conductor ferrules)
Cable length
2 m
Rated impulse withstand voltage Uimp
4 kV
Rated insulation voltage Ui
250 V
Conventional thermal current Ithe
5 A
Utilisation category
AC-15; DC-13
Rated operating current/voltage Ie/Ue
5 A/250 VAC; 0.16 A/230 VDC
Short-circuit protection
5 A gG/gN fuse
Ambient temperature
–20 °C … +60 °C
Mechanical life
> 1 million operations
Operation cycles
max. 1800/h
Repeat accuracy of switching points
± 0.1 mm
Impact energy
max. 7 J
Ex marking
L II 2G Ex db IIC T6 Gb
L II 2D Ex tb IIIC T80 °C Db
IECEx Ex db IIC T6 Gb
Ex tb IIIC T80 °C Db
Approvals
PTB 03 ATEX 1067 X
IECEx PTB 11.0089X
a
Weight
252 g
Downloads
Variants / Options
The following variants / options are available on request:
Gold-plated contacts
Cable entry on side
Mounting thread M16 x 1.5
Mounting thread on side M16 x 1.5
Special version only for dust Ex zone 22