Wireless receiver

RF Rx - 4W


  • sWave® wireless technology (SW868/SW915/SW917)

  • 4 potential-free relay outputs

  • 4 change-over contacts

  • Transmitter/receiver assignment by teaching mode

  • LEDs for indication of switching state

Notes
  • External antenna always required for optimum range and to meet the licensing requirements for radio communications

Technical data

Applied standards

EN 300 220-2, EN 301 489-1, EN 301 489-3, EN 60947-5-1, EN 61000-6-2, EN 61000-6-3, EN 55011, EN 55032

Enclosure

polycarbonate, RAL 7035

Degree of protection

IP20 (IEC/EN 60529)

Mounting

DIN rail mounting

Connection

terminals with CAGE CLAMP WAGO Series 236: 0.08 … 2.5 mm² / AWG 28-12, AWG 12: THHN, THWN, stripping length 5 … 6 mm / 0.22 in

Outputs

4 change-over contacts (relays)

Rated operating current/voltage Ie/Ue

max. 0.09 A/24 VDC -15 % … +10 %; max. 0.15 A/24 VAC -15 % … +10 %;
output contacts: 6 A/250 VAC; 2 A/24 VDC

Utilisation category

outputs: AC-15 (at 10 % Ie); DC-13

Rated insulation voltage Ui

250 VAC

Rated impulse withstand voltage Uimp

2.5 kV

Display

1 x green LED: ready for operation,
4 x orange LED: signalling of switching state

Recovery time

max. 24 ms (measured from the start of a radio telegram to the end of the relay contact bounce time, with 1 x repetition of the radio telegram due to transmission disturbance)

Teachable transmitters

40

Operation cycles

max. 12000 telegrams with repetitions/h

Degree of pollution

2

Ambient temperature

0 °C … +55 °C

Storage and shipping temperature

–25 °C … +85 °C

Note

Inductive loads (contactors, relays etc.) are to be suppressed by suitable circuitry.

Wireless approvals

Europe: RED 2014/53/EU
USA: FCC - XK5-RFRXSW915
Canada: IC - 5158A-RFRXSW915
Mexico: IFT - RCPSTRF17-1886
Brazil: ANATEL 04172-18-06718

Approvals

d

Downloads

Loading...
Mounting and wiring instructions – RF Rx-4W

German, English, French, Italian, Portuguese

PDF 2 MB 27.09.2023
Please go to the relevant product pages for additional downloads.

Other interesting products

RF Rx - 4S

Alternative wireless receiver with 4 potential-free relay outputs (4 NO contacts)

RF Rx - 4S 48V

Alternative wireless receiver with 4 potential-free optocoupler outputs (4 NO)

RF Rx - 2W-RS232

Alternative wireless receiver with RS232 interface and 2 potential-free relay outputs (2 change-over contacts)

RF Rx - TCP/IP

Alternative wireless receiver with TCP/IP interface

RF RxT - USB

Alternative wireless receiver with USB interface