Wireless magnetic sensor
RF RC M30
- Thermoplastic or stainless steel enclosure
- sWave® wireless technology (SW868/SW915/SW917/SW922)
- Power supply by Lithium battery (replaceable)
- No wiring and pipe laying required
- Easy programming of receiver
- Output signal can be individually configured at the receiver
- Available with "LBT - Listen before Talk" software (necessary in conjunction with potential interference)
- Suitable for the food processing industry
- 2 mounting nuts are included in delivery
- The actuator is not included in the delivery of the switches
FILTER
Technical data
General technical data
Applied standards
EN 60947-5-1, EN 61000-6-2, EN 61000-6-3, EN 301 489-1, EN 301 489-3, EN 300 220-2
Enclosure
Stainless steel 1.4539 or PVC-C
Degree of protection
IP67 (IEC/EN 60529)
Type of installation
flush, in not ferromagnetic material
Ambient temperature
–20 °C … +65 °C
Switching system
reed contact
Rated switching distance sn
M 100: 15 mm; M 30 Niro: 30 mm
Hysteresis
< 1 mm
Switching frequency
max. 5 Hz
Standby current
< 2 µA (< 5 µA activated)
Wireless range
SW868/915/917:
max. 450 m outdoors,
max. 40 m indoors
SW922:
max. 150 m outdoors,
max. 20 m indoors
Mechanical life
> 1 million operations
Actuating time
min. 80 ms
Note
status signal configurable ex works
transmission of battery voltage and switching condition
Wireless approvals
Europe: RED 2014/53/EU
USA: FCC - XK5-RFRXSW915
Canada: IC - 5158A-RFRXSW915
Mexico: IFT - RCPSTRF17-1886
Brazil: ANATEL 04172-18-06718
Japan: ? ARIB STD-T108: 204-610002
Voltage supply
Voltage source
lithium battery CR 2032 (replaceable)
System
Lithium-MnO2
Nominal voltage
3 V
Nominal capacity
0.23 Ah
Battery life
depending on operation cycles (typ. @ 20 °C)
10 s: 1.1 years; 100 s: 5.0 years; 1000 s: 7.6 years; without: 8.0 years
Downloads
Variants/Options
The following variants / options are available on request:
- LBT - Listen before Talk software (necessary in conjunction with potential interference)
- Sensor based on GMR effect (RF GS M30 …)
