Inductive sensor
IS M8 Extreme
Cold-resistant down to -40 °C or heat-resistant up to +120 °C
High degree of protection IP68
Stainless steel enclosure
Flush mounting
Long life, no mechanical wear
Suitable for the food processing industry
Insensitive to soiling
With LED
M8 x 1 thread
With pre-wired cable
Attention: Please state required international approvals with your order!
Technical data
General technical data
Applied standards
EN 60947-5-2
Enclosure
stainless steel 1.4305
Front cap
POM
Degree of protection
IP68 (IEC/EN 60529)
Connection
cable PUR
Cable diameter
3.6 mm
Cable cross-section
3 x 0.14 mm²
Switching elements
1 NO contact, PNP, 3-wire
Rated switching distance sn
2 mm
Correction factors
Steel (Fe360) = 1;
Rated operating voltage range UB
6 … 30 VDC
Residual ripple
≤ 10 %
Switching current
max. 0.2 A
Voltage drop at Ie
max. 1.8 V
Current absorption
< 12 mA at 24 VDC
Hysteresis
approx. 10 %
Switching frequency
2000 Hz
Repeatability
≤ 3 %
Protection circuit
Inductive interference protection, protection against polarity reversal, short-circuit and overload proof
Ambient temperature
–40 °C … +50 °C or
0 °C … +120 °C
