Ex inductive sensor
Ex IS M18
Ex zone 0 and 20
Stainless steel enclosure
Flush or non-flush mounting
Long life, no mechanical wear
Suitable for the food processing industry
Insensitive to soiling
With LED
M18 x 1 thread
With pre-wired cable
Attention: Please state required international approvals with your order!
Technical data
General technical data
Applied standards
EN IEC 60079-0, EN 60079-11, EN 60079-26
Enclosure
stainless steel 1.4305
Front cap
POM
Degree of protection
IP66, IP67, IP68 (EN 60079-0 + IEC/EN 60529)
Connection
cable PUR blue
Cable diameter
4.5 mm
Cable cross-section
2 x 0.5 mm²
Switching system
Namur to EN 60947-5-6
Rated switching distance sn
Ex IS M18b: 5 mm;
Ex IS M18nb: 8 mm
Correction factors
Steel (Fe360) = 1;
Rated operating voltage range UB
8.2 VDC
Current absorption
in presence of metal ≤ 1 mA; in absence of metal ≥ 3 mA
Switching frequency
1000 Hz
Repeatability
≤ 3 %
Protection circuit
Inductive interference protection, protection against polarity reversal, short-circuit and overload proof
Ambient temperature
–25 °C … +60 °C
Ex marking
L II 1G Ex ia IIC T6 Ga,
L II 1D Ex ia IIIC T85°C Da
Approvals
IMQ 14 ATEX 001
IECEx IMQ 14.0001
