Product features
sWave® wireless technology
4 potential-free relay outputs
4 NO contacts, max. 3 A
Transmitter/receiver assignment by teaching mode
LEDs for indication of switching state
SMA reverse plug-in connector for external antenna
Power-down-function (saves the last signal status from the relay output, if the power supply of the receiver box is interrupted)
Notes
External antenna always required for optimum wireless range
Technical data
General technical data
Applied standards
EN 60947-5-1, EN IEC 61000-6-2, EN IEC 61000-6-3, EN 61000-4-2, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 60068-2-6, EN 60068-2-27, EN 301 489-1, EN 301 489-3, EN 300 220-1, EN 300 220-2
Enclosure
thermoplastic, glass-fibre reinforced, shockproof, self-extinguishing UL 94 V-0
Degree of protection
IP20 (IEC/EN 60529)
Number of channels
4
Mounting
DIN rail mounting
Connection
screw connection terminals 0.14 mm² - 2,5 mm², stripping length 8 mm
Teachable transmitters
40
Outputs
4 NO contacts (relay)
Rated operating current/voltage Ie/Ue
max. 0.1 A/24 VDC -15 % … +10 %;
output contacts: 3 A/250 VAC; 3 A/24 VDC
Utilisation category
AC-15; DC-13
Rated insulation voltage Ui
250 VAC
Rated impulse withstand voltage Uimp
2.5 kV
Display
green LED: ready for operation,
orange LED: signalling of switching state
Operation cycles
max. 12000 telegrams with repetitions/h
Degree of pollution
2
Ambient temperature
0 °C … +55 °C (on request –20 °C … +55 °C)
Storage and shipping temperature
–25 °C … +85 °C
Note
Inductive loads (contactors, relays etc.) are to be suppressed by suitable circuitry.
Switching contacts are not suitable for capacitive loads.
Wireless approvals
USA: FCC - XK5-RFRXSW915
Canada: IC - 5158A-RFRXSW915
Mexico: IFT - RCPSTRF17-1886
Approvals
d
Weight
89 g
Wireless technology
Protocol
sWave®
Frequency
915 MHz (USA, Canada, Mexico, Australia)
Transmission power
< 25 mW
Data rate
66 kbps
Channel bandwidth
550 kHz
Downloads
Other interesting products
Alternative wireless receiver with 4 potential-free relay outputs (4 change-over contacts)
Alternative wireless receiver with RS232 interface and 2 potential-free relay outputs (2 change-over contacts)
