Below the sensor window a red LED indicates the battery status. It will light up for 1 second if the battery voltage is low. In this case assume that the battery is empty and needs to be changed.
Setting and monitoring a status signal
Function and usage of “Listen Before Talk” (LBT)

Wireless laser sensor

RF 96 SDS SW917 LBT

Article no.: on request

This product is only available on request, please contact our sales team. contact us

Product features

Wireless

  • sWave® wireless technology (SW868/SW915/SW917/SW922)

  • Time of Flight Sensor

  • Power supply by Lithium battery (replaceable)

  • Easy programming of receiver

  • LBT - Listen before Talk software (necessary in conjunction with potential interference)

Notes

  • The battery must be ordered separately

    Technical data

    Applied standards

    EN IEC 60947-5-2, EN 55011, EN IEC 61000-6-2, EN IEC 61000-6-3, EN 301 489-1, EN 301 489-3, EN 300 220-1, EN 300 220-2

    Enclosure

    thermoplastic, glass-fibre reinforced, impact resistant, self-extinguishing UL 94 V-0

    Tightening torque

    M4 enclosure mounting screw: max 1.2 Nm
    M2.5 cover screws: approx. 0.45 Nm

    Degree of protection

    IP54 (IEC/EN 60529)

    Sensor

    logging with IR laser

    Laser class

    Class 1 to EN 60825-1; 950 nm

    Ambient temperature

    0 °C … +65 °C

    Telegram rate

    max. 7200 telegrams with repetitions/h

    Switching frequency

    0.33 Hz

    Cycle time

    3 s

    Switching distances

    25 cm

    Hysteresis

    one side, default 4 cm

    Standby current

    200 µA

    Accuracy

    ± 20 mm

    Field of view

    27°

    Actuating time

    min. 20 ms

    Note

    status signal adjustable via jumper, no, 10 s, 100 s, 1000 s, 10000 s
    delivery state: jumper position without status signal
    transmission of battery voltage and switching condition

    Wireless approvals

    Brazil: ANATEL 04172-18-06718

    Protocol

    sWave®

    Frequency

    917 MHz (Brazil)

    Transmission power

    < 25 mW

    Data rate

    66 kbps

    Channel bandwidth

    550 kHz

    Wireless range

    max. 450 m outdoors, max. 40 m indoors

    Modulation type

    2-FSK

    Voltage source

    lithium battery Tadiran TL-5920 (replaceable), alternatively SL-2770

    System

    Li/SOCl2

    Nominal voltage

    3.6 V

    Nominal capacity

    8.5 Ah

    Voltage source

    lithium battery Tadiran SL-2770 (replaceable)

    System

    Li/SOCl2

    Nominal voltage

    3.6 V

    Nominal capacity

    8.5 Ah

    Battery life

    Typical values with default settings.
    Actuation interval
    10 s: approx. 3.9 years
    100 s: approx. 4.1 years
    1,000 s: approx. 4.2 years
    10,000 s: approx. 4.2 years
    N.B.: Changes in battery lifetime are almost linear to changes in cycle time.

    Below the sensor window a red LED indicates the battery status. It will light up for 1 second after transmission if the battery voltage is low. In this case assume that the battery is empty and needs to be changed.

    Downloads

    Mounting and wiring instructions – RF 96 SDS

    German, English, French, Italian, Portuguese

    PDF2 MB 13.12.2024

    Wireless laser sensor

    RF 96 SDS SW917 LBT

    Article no.: on request

    This product is only available on request, please contact our sales team. contact us