Door contact for lift doors
ES 14 AZ Extreme
High degree of protection IP67
Thermoplastic enclosure
Compact design
Slow action A, 1 NC contact
With pre-wired cable
Double insulated X
Attention: Please state required international approvals with your order!
The actuator is not included in the delivery of the switches
Technical data
General technical data
Applied standards
EN 60947-5-1, EN ISO 13849-1, EN ISO 14119, EN 81-1, EN 81-2, EN 81-20, EN 81-50
Enclosure
thermoplastic, glass-fibre reinforced, impact resistant, self-extinguishing UL 94 V-0
Switch type
type 2
Coding level
low coding
Tightening torque
enclosure mounting screws: max. 1.5 Nm
Degree of protection
IP67 (IEC/EN 60529)
B10d (10 % load)
2 million
TM
max. 20 years
Contact material
silver
Switching system
slow action, positive break NC contacts A
Switching elements
1 NC contact
Connection
pre-wired cable H03VV-F
Cable cross-section
2 x 0.75 mm²
Cable length
1.5; 3; 5; 6 or 10 m
Rated impulse withstand voltage Uimp
4 kV
Rated insulation voltage Ui
250 V
Conventional thermal current Ithe
2 A
Rated operating current/voltage Ie/Ue
2 A/230 VAC; 0.25 A/230 VDC
Utilisation category
AC-15; DC-13
Short-circuit protection
2 A gG/gN fuse
Ambient temperature
–20 °C … +65 °C
Mechanical life
> 1 million operations
Operation cycles
max. 1800/h
Repeat accuracy of switching points
± 0.1 mm
Contact opening
max. 2 x 2.5 mm
Actuating force
approx. 2 - 3.5 N
Approvals
F ]
d on request
Downloads
Variants / Options
The following variants / options are available on request:
Cable entry on side
Version with UL/CSA approval
