Product features
sWave® wireless technology
Time-of-flight sensor: measurement based on travel time of emitted light impulse
Simple mounting
Energy-efficient time-of-flight measurement: switching period 3 secs.
Switching distance: max. 250 mm, independently of object colour or material
Power supply by Lithium battery (replaceable)
Easy programming of receiver
LBT - Listen before Talk Firmware
Notes
Factory delivery with battery type SL-760 (AA).
Technical data
General technical data
- Applied standards
- EN 300 220-2, EN 301 489-3, EN 62479, EN IEC 60947-5-2, EN IEC 61000-6-2, EN 55011, EN 55032, EN IEC 63000
- Enclosure
- thermoplastic, glass-fibre reinforced, impact resistant, self-extinguishing UL 94 V-0
- Battery adapte
- POM C, natural
- Tightening torque
- M4 enclosure mounting screw: max 1.2 Nm
M2.5 cover screws: approx. 0.45 Nm
- Degree of protection
- IP54 (IEC/EN 60529)
- Sensor
- logging with IR laser
- Laser class
- Class 1 to EN 60825-1; 950 nm
- Safety class
- III
- Ambient temperature
- –20 °C … +65 °C
- Type of installation
- screw connection
- Mounting position
- any
- Switching frequency
- 0.33 Hz
- Switching distances
- 25 cm
- Accuracy
- ± 20 mm
- Field of view
- 27°
- Cycle time
- 3 s
- Hysteresis
- one side, default 4 cm
- Switch-on delay ton
- max. 3 s
- Switch-off delay toff
- max. 3 s
- Recovery time
- 6 s
- Actuating time
- min. 20 ms
- Note
- transmission of battery voltage and switching condition
Wireless technology
General
- Frequency
- 868.3 MHz (Europe)
- Data rate
- 66 kbps
- Channel bandwidth
- 350 kHz
- Modulation type
- 2-FSK
- Protocol
- sWave®
- Transmission power
- < 25 mW
- Wireless approvals
- Europe: RED 2014/53/EU
Function
- Telegram rate
- max. 12000 telegrams with repetitions/h
- Wireless range
- max. 450 m outdoors, max. 40 m indoors
- Note
- status signal – can be individually configured via radio receiver (delivery state: without status signal)
LBT – can be deactivated via radio receiver (e.g. in conjunction with repeaters)
Go to our different wireless receivers to find corresponding how-to videos.
Voltage supply
- Voltage source
- lithium battery Tadiran SL-2770 (C), replaceable
- System
- Li/SOCl2
- Nominal voltage
- 3.6 V
- Nominal capacity
- 8.5 Ah
- Standby current
- 200 µA
- Battery life
- Typical values with default settings.
Actuation interval
10 s: approx. 3.9 years
100 s: approx. 4.1 years
1,000 s: approx. 4.2 years
10,000 s: approx. 4.2 years
N.B.: Changes in battery lifetime are almost linear to changes in cycle time.
Alternative voltage supply
- Voltage source
- lithium battery Tadiran SL-760 (AA), replaceable with adapter
- System
- Li/SOCl2
- Nominal voltage
- 3.6 V
- Nominal capacity
- 2.2 Ah
- Standby current
- 200 µA
- Battery life
- Typical values with default settings.
Actuation interval
10 s: approx. 1.0 years
100 s: approx. 1.1 years
1,000 s: approx. 1.1 years
10,000 s: approx. 1.1 years
N.B.: Changes in battery lifetime are almost linear to changes in cycle time.
Note
Below the sensor window a red LED indicates the battery status. It will light up for 1 second after transmission if the battery voltage is low. In this case assume that the battery is empty and needs to be changed.
Dimensional drawing
Below the sensor window a red LED indicates the battery status. It will light up for 1 second if the battery voltage is low. In this case assume that the battery is empty and needs to be changed.
