Position switch with safety function
ES 411 PH 2Ö
Article no.: 1046768Old article no.: 43519001
This product is only available on request, please contact our sales team. contact usProduct features
Metal enclosure
Slow action A, 2 NC contacts with double break
3 cable entries M16 x 1.5
Actuator: Parallel roller lever PH
Actuating speed max. 0.5 m/s with an actuating angle of 30°
Actuation parallel to switch from below
Wear-resistant plastic roller
Actuator can be repositioned by 4 x 90°
Notes
With metal roller available on request
When used as safety switch, secure the enclosure against slipping with appropriate means, e.g. pinning.
Technical data
General technical data
Applied standards
EN ISO 13849-1, EN 60947-5-1, EN ISO 14119
Enclosure
aluminium die-cast, powder-coated
Switch type
type 1
Coding level
no coding
Degree of protection
IP65 (IEC/EN 60529)
B10d (10 % load)
2 million
TM
max. 20 years
Contact material
silver
Switching system
slow action, positive break NC contacts A
Switching elements
2 NC contacts, type Zb
Connection
screw connection terminals
Cable cross-section
max. 2.5 mm² (incl. conductor ferrules)
Cable entry
3 x M16 x 1.5
Rated impulse withstand voltage Uimp
4 kV
Rated insulation voltage Ui
400 V
Conventional thermal current Ithe
6 A
Utilisation category
AC-15
Rated operating current/voltage Ie/Ue
6 A/400 VAC
Short-circuit protection
6 A gG/gN fuse
Mechanical life
> 1 million operations
Operation cycles
max. 3600/h
Ambient temperature
–20 °C … +80 °C
Repeat accuracy of switching points
± 0.1 mm
Approvals
a
Weight
169 g
Downloads
Variants / Options
The following variants / options are available on request:
Gold-plated contacts
Position switch with safety function
ES 411 PH 2ÖArticle no.: 1046768Old article no.: 43519001
This product is only available on request, please contact our sales team. contact us