Position switch
ES 13 TL-S 2Ö/1S - 5m
Article no.: on request
This product is only available on request, please contact our sales team. contact usProduct features
Thermoplastic enclosure
Double insulated X
Suitable for in-line mounting
With pre-wired cable
Cable entry on side
Actuator: Long spring rod TL
Spring rod can be actuated from any direction
Spring rod can be shortened 30 mm in actuating area
Exact linear actuation not necessary
Elasticity of the spring allows for deflection above the max. switching angle of 18°
Technical data
General technical data
Applied standards
EN 60947-5-1
Enclosure
thermoplastic, glass-fibre reinforced, impact resistant, self-extinguishing UL 94 V-0
Tightening torque
enclosure mounting screws: max. 5 Nm
Degree of protection
IP67 (IEC/EN 60529)
Contact material
silver
Switching system
slow action
Switching elements
2 NC/1 NO contact, type Zb
Connection
cable 6 x AWG 20
Cable cross-section
6 x 0.56 mm²
Cable length
5 m
Rated impulse withstand voltage Uimp
4 kV
Rated insulation voltage Ui
250 V
Conventional thermal current Ithe
6 A
Rated operating current/voltage Ie/Ue
6 A/250 VAC; 0.25 A/230 VDC; 4 A/24 VDC
Utilisation category
AC-15; DC-13
Short-circuit protection
6 A gG/gN fuse
Ambient temperature
–20 °C … +75 °C
Mechanical life
> 1 million operations
Operation cycles
max. 1800/h
Repeat accuracy of switching points
± 0.1 mm
Contact opening
max. 2 x 3.5 mm
Approvals
a
Downloads
Variants / Options
The following variants / options are available on request:
Cable entry on side
Gold-plated contacts
Connector M12 x 1, 4-pole
Connector M12 x 1, 5-pole
Other interesting products
Position switch
ES 13 TL-S 2Ö/1S - 5mArticle no.: on request
This product is only available on request, please contact our sales team. contact us