Wireless pull-wire switch
RF 96 WH/90° SW922 LBT - 3.2 m nylon pull-wire with rubber ball
Article no.: on request
contact usProduct features
Thermoplastic enclosure
Mounting details to EN 50047
Output signal can be individually configured at the receiver
sWave® wireless technology
No wiring and pipe laying required
Power supply by Lithium battery (replaceable)
Including 3.2 m long pull-wire and ball
LBT - Listen before Talk software (necessary in conjunction with potential interference)
Technical data
General technical data
Applied standards
EN 60947-5-1, EN 61000-6-2, EN 61000-6-3, EN 61000-4-2, EN 301 489-1, EN 301 489-3, EN 300 220-1, EN 300 220-2
Enclosure
thermoplastic, glass-fibre reinforced, shockproof, self-extinguishing UL 94 V-0
Tightening torque
M4 enclosure mounting screws: max 1.2 Nm
M2.5 cover screws: approx. 0.45 Nm
Degree of protection
IP67 (IEC/EN 60529)
Ambient temperature
–20 °C … +65 °C
Operation cycles
max. 1440 telegrams with repetitions/h
Actuating time
min. 80 ms
Mechanical life
> 1 million operations
Note
transmission of battery voltage and switching condition
Wireless approvals
Japan: ? ARIB STD-T108: 204-610002
Wireless technology
Protocol
sWave®
Frequency
916.5 MHz (Japan)
Transmission power
< 1 mW
Data rate
66 kbps
Channel bandwidth
520 kHz
Wireless range
max. 150 m outdoors, max. 20 m indoors
Voltage supply
Voltage source
lithium battery Tadiran SL-2770 (replaceable)
System
Li/SOCl2
Nominal voltage
3.6 V
Nominal capacity
8.5 Ah
Battery life
depending on the switching frequency
1 s: approx. 780 days,
10 s: approx. 1300 days,
100 s: approx. 1400 days
Downloads
Wireless pull-wire switch
RF 96 WH/90° SW922 LBT - 3.2 m nylon pull-wire with rubber ballArticle no.: on request
contact us