Wireless position switch
RF 10 H SW915
Article no.: 1209282 Old article no.: 10120701
contact usProduct features
Thermoplastic enclosure
sWave® wireless technology
No wiring and pipe laying required
Power supply by Lithium battery
Easy programming of receiver
Output signal can be individually configured at the receiver
Technical data
General technical data
Applied standards
EN 60947-5-1, EN 61000-2, EN 61000-3, EN 301 489-1, EN 301 489-3, EN 300 220-2
Enclosure
thermoplastic, glass-fibre reinforced, shockproof, self-extinguishing UL 94 V-0
Tightening torque
enclosure mounting screws: 0.5 … 0.6 Nm
Degree of protection
IP67 (IEC/EN 60529)
Ambient temperature
–20 °C … +65 °C
Operation cycles
max. 12000 telegrams with repetitions/h
Mechanical life
> 1 million operations
Actuating time
min. 80 ms
Note
no status signal available
Wireless approvals
USA: FCC - XK5-RFRXSW915
Canada: IC - 5158A-RFRXSW915
Mexico: IFT - RCPSTRF17-1886
Weight
40 g
Wireless technology
Protocol
sWave®
Frequency
915 MHz (USA, Canada, Mexico, Australia)
Transmission power
< 25 mW
Data rate
66 kbps
Channel bandwidth
550 kHz
Wireless range
max. 450 m outdoors, max. 40 m indoors
Voltage supply
Voltage source
lithium battery CR 2032 (replaceable)
System
Lithium-MnO2
Nominal voltage
3 V
Nominal capacity
0.23 Ah
Battery life
> 800 000 operations
Downloads
Variants / Options
The following variants / options are available on request:
LBT - Listen before Talk software (necessary in conjunction with potential interference)
Wireless position switch
RF 10 H SW915Article no.: 1209282 Old article no.: 10120701
contact us