Ex magnetic sensor
Ex RC 12 1Ö - 10m
Article no.: on request
This product is only available on request, please contact our sales team. contact usProduct features
Ex zone 1 and 21
Brass enclosure, nickeled
Actuation from front
Switching distance up to 25 mm depending on the actuating magnet
With pre-wired cable
Attention: Please state required international approvals with your order!
Notes
The actuator is not included in the delivery of the switches
Technical data
General technical data
Applied standards
EN IEC 60947-5-2, EN IEC 60079-0, EN 60079-18
Enclosure
brass, nickeled
Degree of protection
IP67 (IEC/EN 60529)
Switching system
reed contacts
Switching elements
1 NC contact
Connection
pre-wired cable H05VV-F
Cable cross-section
3 x 0.75 mm²
Cable length
10 m
Switching voltage
max. 250 VAC/DC
Switching current
max. 0.5 A DC / max. 0.35 A AC
Short-circuit current Ik
max. 2 A
Switching capacity
max. 30 W/VA
Ambient temperature
–20 °C … +70 °C
Mechanical life
> 1 million operations
Vibration resistance
max. 15 g (50-2000 Hz)
Shock resistance
max. 10 g (11 ms, ½ sin)
Impact energy
max. 4 J
Ex marking
L II 2G Ex mb IIC T6 Gb,
L II 2D Ex mb IIIC T80 °C Db
IECEx Ex mb IIC T6 Gb
Ex mb IIIC T80 °C Db
Approvals
DMT 01 ATEX E 058 X
IECEx BVS 07.0007 X
fa
Downloads
Variants / Options
The following variants / options are available on request:
Cold-resistant version down to -40 °C
Maritime certification to DNV <
Ex magnetic sensor
Ex RC 12 1Ö - 10mArticle no.: on request
This product is only available on request, please contact our sales team. contact us
