Setting and monitoring a status signal
Activating the Listen-Before-Talk function

Wireless laser sensor

RF 96 SDS


  • sWave® wireless technology

  • Time-of-flight sensor: measurement based on travel time of emitted light impulse

  • Simple mounting

  • Energy-efficient time-of-flight measurement: switching period 3 secs.

  • Switching distance: max. 250 mm, independently of object colour or material

  • Power supply by lithium battery (replaceable)

  • Easy programming of receiver

  • LBT - Listen Before Talk firmware

Technical data

Applied standards
EN 300 220-2, EN 301 489-3, EN 62479, EN IEC 60947-5-2, EN IEC 61000-6-2, EN 55011, EN 55032, EN IEC 63000
Enclosure
thermoplastic, glass-fibre reinforced, shockproof, self-extinguishing UL 94 V-0
Battery adapter
POM C, natural
Window plate
acrylic, red
Tightening torque
M4 enclosure mounting screws: max 1.2 Nm
M2.5 cover screws: approx. 0.45 Nm
Degree of protection
IP54 (IEC/EN 60529)
Sensor
logging with IR laser
Laser class
Class 1 to EN 60825-1; 950 nm
Flush-mounted
yes
Safety class
III
Ambient temperature
0 °C … +65 °C
Type of installation
screw connection
Mounting position
any
Switching system
activated if switching distance is not reached
Switching frequency
max. 10 / minute
Switching distances
25 cm fixed
Opening angle of the IR receiver
27°
Hysteresis
one side, 4 cm fixed
Repeatability
± 2.5 cm
Switch-on delay ton
max. 3 s
Switch-off delay toff
max. 3 s
Recovery time
6 s
Wireless range
max. 450 m outdoors, max. 40 m indoors
Actuating time
min. 20 ms
Note
status signal – can be individually configured via radio receiver (delivery state: without status signal)
LBT – can be deactivated via radio receiver (e.g. in conjunction with repeaters)
transmission of battery voltage and switching condition
Go to our different wireless receivers to find corresponding how-to videos.
Wireless approvals
Europe: RED 2014/53/EU
USA: FCC - VPYLBAA0QB1SJ
Canada: IC - 772C-LBAA0QB1SJ
Brazil: on request
Japan: on request

Below the sensor window a red LED indicates the battery status. It will light up for 1 second after transmission if the battery voltage is low. In this case assume that the battery is empty and needs to be changed.

Downloads

Mounting and wiring instructions – RF 96 SDS

German, English, French

PDF 2 MB 15.09.2026
Please go to the relevant product pages for additional downloads.